Here is a list of all file members with links to the files they belong to:

- o -

• OCT : Print.h
• odDebugInit : oddebug.h
• OFF : Uno_ChargePump_AnalogOut.ino
• off : term.js
• offsetof : stddef.h
• OK_LED : okLed.c
• OLATA : mcp23x08.h
• OLATB : mcp23x08.h
• oldPage : General_Stuff.h
• oled : OWP_DG_LCD_Sensors.ino , Yun_SHT31_WiFi_REST.ino
• OLED_RESET : ssd1306_128x64_i2c.ino
• on : term.js
• once : term.js
• ONE_WIRE_PIN : OWP_DG_1w-adaptor.ino
• onEvent() : Uno_Dragino_LoRa_GPS_Shield_TTN.ino
• onewire_init : onewire.h , onewire.c , onewire_internal.h
• onewire_poll : onewire.h , onewire.c , onewire_internal.h
• ONEWIRE_USE_T0 : features.h
• onewireInterrupt() : OWHumidity2.ino , OWRain1.ino
• ONLYARMWHENFLAT : config.h
• onOff : Uno_ChargePump_AnalogOut.ino
• open : term.js
• options : term.js
• or : iso646.h
• or_eq : iso646.h
• original_altitude : MultiWii.cpp
• os_getArtEui() : Uno_Dragino_LoRa_GPS_Shield_TTN.ino
• os_getDevEui() : Uno_Dragino_LoRa_GPS_Shield_TTN.ino
• os_getDevKey() : Uno_Dragino_LoRa_GPS_Shield_TTN.ino
• osc : term.js
• OUT_PIN : isr-osc.c
• Output : Yun_ChargePump_AnalogOut.ino
• OUTPUT : Arduino.h , wiringPi.h
• output_accX() : LCD.h
• output_accY() : LCD.h
• output_accZ() : LCD.h
• output_altitude() : LCD.h
• output_AmaxA() : LCD.h
• output_annex() : LCD.h
• output_checkboxitems() : LCD.h
• output_checkboxstatus() : LCD.h
• output_cycle() : LCD.h
• output_cycleMinMax() : LCD.h
• output_debug0() : LCD.h
• output_debug1() : LCD.h
• output_debug2() : LCD.h
• output_debug3() : LCD.h
• output_errors_or_armedTime() : LCD.h
• output_fails() : LCD.h
• output_gyroX() : LCD.h
• output_gyroY() : LCD.h
• output_gyroZ() : LCD.h
• output_mAh() : LCD.h
• output_uptime_cset() : LCD.h
• output_V() : LCD.h
• output_WmaxW() : LCD.h
• outputs : buttons.c , motor.c , reaction.c
• ow() : OWP_DG_1w-adaptor.ino
• ow_addr : onewire.c , onewire_internal.h
• owHandler() : OWHumidity2.ino , OWRain1.ino
• OWM_AFTER_RESET : onewire_internal.h
• OWM_IDLE : onewire_internal.h
• OWM_IN_RESET : onewire_internal.h
• OWM_PRESENCE : onewire_internal.h
• OWM_READ : onewire_internal.h
• OWM_SEARCH_ONE : onewire_internal.h
• OWM_SEARCH_READ : onewire_internal.h
• OWM_SEARCH_ZERO : onewire_internal.h
• OWM_SLEEP : onewire_internal.h
• OWM_WRITE : onewire_internal.h
• OWPin : OWGeneric.ino , OWGeneric_SensorStation.ino , OWGeneric_DangerShield.ino , OWHumidity2.ino , OWRain1.ino
• OWPJON_PIN : OWP_DG_Dragino_Sensors.ino , BlinkingSwitch_SWBB-TL.ino , BlinkingSwitch_SWBB-TL_semitransparent.ino
• OWPJONID : DeviceGeneric.ino , OWP_DG_Si7021_thermo-hygrometer.ino , OWP_DG_MicroView.ino , OWP_DG_1w-adaptor.ino , OWP_DG_SensorStation.ino
• OWPJONPIN : OWP_DG_Si7021_thermo-hygrometer.ino , OWP_DG_SensorStation.ino , OWP_DG_MicroView.ino , OWP_DG_1w-adaptor.ino , DeviceGeneric.ino
• owReset : OWRain1.ino , OWHumidity2.ino
• OWT_LOWTIME : onewire_internal.h
• OWT_MIN_RESET : onewire_internal.h
• OWT_PRESENCE : onewire_internal.h
• OWT_READLINE : onewire_internal.h
• OWT_RESET_PRESENCE : onewire_internal.h
• OWW_NO_WRITE : onewire_internal.h
• OWW_WRITE_0 : onewire_internal.h
• OWW_WRITE_1 : onewire_internal.h
• OWX_COMMAND : onewire_internal.h
• OWX_IDLE : onewire_internal.h
• OWX_RUNNING : onewire_internal.h
• OWX_SELECT : onewire_internal.h