OWP_DG_MicroView.ino File Reference

#include <MicroView.h>
#include <PJON.h>

Macros
#define	ENABLE_DEBUG
#define	SENSOR   "owp:dg:v1"
#define	OWPJONID   99
#define	OWPJONPIN   2
#define	READ_INFO   0x01
#define	READ_VCC   0x11
#define	READ_TEMP   0x12
#define	READ   0x21
#define	WRITE   0x22
#define	WRITE_CAL   0x32

Functions
PJON< SoftwareBitBang >	bus (OWPJONID)
void	setup ()
void	receiver_function (uint8_t *payload, uint16_t length, const PJON_Packet_Info &packet_info)
void	loop ()
float	readVcc ()
float	readTemp (void)

Variables
uint8_t	mem_buffer [256]

Macro Definition Documentation

#define ENABLE_DEBUG

#define OWPJONID   99

#define OWPJONPIN   2

#define READ   0x21

#define READ_INFO   0x01

#define READ_TEMP   0x12

#define READ_VCC   0x11

#define SENSOR   "owp:dg:v1"

#define WRITE   0x22

#define WRITE_CAL   0x32

Function Documentation

PJON<SoftwareBitBang> bus

(

OWPJONID

)

void loop

(

void

)

OneWirePJON device status update function.

Returns

(void)

float readTemp

(

void

)

Internal Temperature Sensor for ATmega328 types.

Parameters

void

See Also

receiver_function()

https://playground.arduino.cc/Main/InternalTemperatureSensor

Returns

The chip temperature in [°C]

float readVcc

(

)

Accessing the secret voltmeter on the Arduino 168 or 328.

See Also

receiver_function()

http://code.google.com/p/tinkerit/wiki/SecretVoltmeter

Returns

The supply voltage in [V]

void receiver_function	(	uint8_t *	payload,
		uint16_t	length,
		const PJON_Packet_Info &	packet_info
	)

void setup

(

void

)

Arduino IDE: put your setup code here, to run once.

Variable Documentation

uint8_t mem_buffer[256]