- o -

• OCT : Print.h
• odDebugInit : oddebug.h
• OFF : Uno_ChargePump_AnalogOut.ino
• offsetof : stddef.h
• OK_LED : okLed.c
• OLATA : mcp23x08.h
• OLATB : mcp23x08.h
• OLED_RESET : ssd1306_128x64_i2c.ino
• ONE_WIRE_PIN : OWP_DG_1w-adaptor.ino
• onewire_init : onewire.h
• onewire_poll : onewire.h
• ONEWIRE_USE_T0 : features.h
• ONLYARMWHENFLAT : config.h
• or : iso646.h
• or_eq : iso646.h
• OUT_PIN : isr-osc.c
• OUTPUT : Arduino.h , wiringPi.h
• OWPin : OWGeneric.ino , OWGeneric_DangerShield.ino , OWGeneric_SensorStation.ino , OWHumidity2.ino , OWRain1.ino
• OWPJON_PIN : BlinkingSwitch_SWBB-TL_semitransparent.ino , OWP_DG_Dragino_Sensors.ino , BlinkingSwitch_SWBB-TL.ino
• OWPJONID : OWP_DG_Si7021_thermo-hygrometer.ino , OWP_DG_SensorStation.ino , DeviceGeneric.ino , OWP_DG_1w-adaptor.ino , OWP_DG_MicroView.ino
• OWPJONPIN : DeviceGeneric.ino , OWP_DG_1w-adaptor.ino , OWP_DG_Si7021_thermo-hygrometer.ino , OWP_DG_MicroView.ino , OWP_DG_SensorStation.ino
• OWT_LOWTIME : onewire_internal.h
• OWT_MIN_RESET : onewire_internal.h
• OWT_PRESENCE : onewire_internal.h
• OWT_READLINE : onewire_internal.h
• OWT_RESET_PRESENCE : onewire_internal.h