OWH_DS2433_EEPROM_LCD.ino File Reference

#include "OneWireHub.h"
#include "DS2433.h"
#include <Wire.h>
#include <SeeedGrayOLED.h>

Functions
bool	blinking (void)
void	setup ()
void	loop ()
long	readVcc ()
double	GetTemp (void)

Variables
constexpr uint8_t	pin_onewire { 8 }
constexpr uint8_t	pin_led { 13 }
constexpr uint8_t	pin_button { 2 }
uint8_t	mem_read [16]
uint8_t	display_mode = 0
uint8_t	mem_buffer [144]
auto	hub = OneWireHub(pin_onewire)
auto	ds2433 = DS2433(DS2433::family_code, 0x00, 0x00, 0x33, 0x24, 0xDA, 0x00)

Function Documentation

bool blinking

(

void

)

double GetTemp

(

void

)

void loop

(

void

)

OneWirePJON device status update function.

Returns

(void)

long readVcc

(

)

void setup

(

void

)

Arduino IDE: put your setup code here, to run once.

Variable Documentation

uint8_t display_mode = 0

auto ds2433 = DS2433(DS2433::family_code, 0x00, 0x00, 0x33, 0x24, 0xDA, 0x00)

auto hub = OneWireHub(pin_onewire)

uint8_t mem_buffer[144]

uint8_t mem_read[16]

constexpr uint8_t pin_button { 2 }

constexpr uint8_t pin_led { 13 }

constexpr uint8_t pin_onewire { 8 }