interface version 1
Instantiates surface operations at each point of a point cloud.
The operator has a geometry (1st) and a point cloud (2nd) input. A SOP subnetwork can be built inside the operator, which runs for each point in the point cloud.
For each point, all modeling are performed in a per-point local coordinate system, defined by standard instancing attributes.
See Copying and instancing point attributes for the various supported point attributes. (These define a local coordinate system on a per-point basis.)
A crater geometry (blue) added and stitched into the moon surface, at randomly scattered points. (The points have normal attribute, so orientation is handled automatically.)
Note
Double-click on the operator (or press I or Enter) to enter the modeling subnetwork.
Parameters
| Single Point | If enabled, only a single point will be used from the point cloud. This is useful when building or debugging the modeling subnet. |
Release Notes
interface version 1 —
| 2014-04-01 |
|