Shape Expressions (ShEx) is a language for describing RDF graph structures. A ShEx schema prescribes conditions that RDF data graphs must meet in order to be considered "conformant": which subjects, predicates, and objects may appear in a given graph, in what combinations and with what cardinalities and datatypes. In the ShEx model, an RDF graph is tested against a ShEx schema to yield a validation result that flags any parts of the data which do not conform. ShEx schemas are intended for use in validating RDF data, communicating interface parameters and data structures, generating user interfaces, and transforming RDF graphs into other data formats and structures. This primer introduces ShEx by means of annotated examples. Readers should already be familiar with the basic concepts of RDF. The primer is a companion to the full ShEx language specification [[shex-semantics]].

This version of the document represents a Candidate Release, with stable features. Comments and implementations are solicited prior to an eventual Final 2.0 Release.

The Shape Expressions language is expected to remain stable with the exception of:

Quick Start

Shape Expressions (ShEx) is a language for describing RDF graph structures. A ShEx schema prescribes conditions that RDF data graphs must meet in order to be considered "conformant". In the ShEx model, a shape map specifies which nodes in an RDF graph will be tested against a ShEx schema. ShEx schemas are intended for use in validating instance data, communicating interface parameters and data structures, generating user interfaces, and transforming RDF graphs into other data formats and structures. This primer, a companion to the full ShEx language specification [[shex-semantics]], focuses on the common use case of validating instance data.

A ShEx schema is built on node constraints and triple constraints that define what it means for a given RDF data graph to conform. An RDF triple is the three-part data structure of subject, predicate, and object with which all RDF data is expressed, and an RDF node is the piece of data found in the subject or object position of a triple. (Readers unfamiliar these terms may want to consult an RDF primer.[[rdf11-primer]]) Node constraints and triple constraints are called "constraints" because they define, or "constrain", the set of RDF nodes and data triples that will pass a conformance test.

Picture an RDF database (graph) that carries information about enrollees in a school. Put yourself into the position of a data manager who wants to ensure that every student "record" in this graph reports a valid age and references one or two guardians, identified by IRI. The ShEx schema for accomplishing this has: one node constraint, school:enrolleeAge, for matching data nodes with an integer value between 13 and 20; one triple constraint, defined within the shape school:Enrollee, for matching one or two triples having the predicate ex:hasGuardian, and a second node constraint for specifying that the object (value) of the triple is an IRI. Data that conforms to these constraints will pass validation tests, and data that does not conform will fail.

PREFIX school: <http://school.example/#>
PREFIX xsd: <http://www.w3.org/2001/XMLSchema#>
PREFIX ex: <http://ex.example/#>

# Node constraint
school:enrolleeAge xsd:integer MinInclusive 13 MaxInclusive 20


school:Enrollee {
  # Triple constraint (including node constraint IRI)
  ex:hasGuardian IRI {1,2}
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://school.example/#enrolleeAge",
      "type": "NodeConstraint",
      "datatype": "http://www.w3.org/2001/XMLSchema#integer",
      "mininclusive": 13, "maxinclusive": 20 },
    { "id": "http://school.example/#Enrollee",
      "type": "Shape",
      "expression": {
        "type": "TripleConstraint", "min": 1, "max": 2,
        "predicate": "http://ex.example/#hasGuardian",
        "valueExpr": {
          "type": "NodeConstraint",
          "nodeKind": "iri" } } }
  ] }
PREFIX ex: <http://ex.example/#>
PREFIX inst: <http://example.com/users/>

inst:Student1 ex:hasGuardian
  inst:Person2, inst:Person3 .
PREFIX ex: <http://ex.example/#>
PREFIX inst: <http://example.com/users/>

inst:Student2 ex:hasGuardian
  inst:Person4, inst:Person5, inst:Person6 .

The next example adds a triple constraint on the data predicate foaf:age, which must have a value matching the node constraint school:enrolleeAge, which is cited in the triple constraint by reference, indicated by the '@' symbol.

PREFIX ex: <http://ex.example/#>
PREFIX xsd: <http://www.w3.org/2001/XMLSchema#>
PREFIX school: <http://school.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>

school:enrolleeAge xsd:integer MinInclusive 13 MaxInclusive 20 

school:Enrollee {
  foaf:age @school:enrolleeAge ;
  ex:hasGuardian IRI {1,2}
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://school.example/#enrolleeAge",
      "type": "NodeConstraint",
      "datatype": "http://www.w3.org/2001/XMLSchema#integer",
      "mininclusive": 13, "maxinclusive": 20 },
    { "id": "http://school.example/#Enrollee",
      "type": "Shape",
      "expression": {
        "type": "EachOf",
        "expressions": [
          { "type": "TripleConstraint",
            "predicate": "http://xmlns.com/foaf/0.1/age",
            "valueExpr": "http://school.example/#enrolleeAge" },
          { "type": "TripleConstraint", "min": 1, "max": 2,
            "predicate": "http://ex.example/#hasGuardian",
            "valueExpr": {
              "type": "NodeConstraint",
              "nodeKind": "iri" } }
        ] } }
  ] }
PREFIX ex: <http://ex.example/#>
PREFIX inst: <http://example.com/users/>
PREFIX school: <http://school.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>

inst:Alice foaf:age 13 ;                     
  ex:hasGuardian inst:Person2, inst:Person3 .

inst:Bob foaf:age 15 ;                       
  ex:hasGuardian inst:Person4 .              
PREFIX ex: <http://ex.example/#>
PREFIX inst: <http://example.com/users/>
PREFIX school: <http://school.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>

inst:Claire foaf:age 12 ;                     
  ex:hasGuardian inst:Person5 .               

inst:Don foaf:age 14 .                        

The four RDF data nodes inst:Alice, inst:Bob, inst:Claire, and inst:Don can be tested against the shape school:Enrollee by using either a fixed shape map, which selects nodes by simple enumeration, or a query shape map, which selects nodes matching a triple pattern. In the latter, the shape map keyword "FOCUS" identifies the node of the triple to be selected (here, the subject node), and the keyword "_" acts as a placeholder for any object. For readability, the IRIs are rendered here with prefixes.

inst:Alice @ school:Enrollee,
inst:Bob @ school:Enrollee,
inst:Claire @ school:Enrollee,
inst:Don @ school:Enrollee
          
{FOCUS, foaf:age, _} @ school:Enrollee
          

This example yields a validation result in the form of a result shape map. A validation result may be presented in different formats and with different levels of verbosity according to implementation requirements.

NodeShapeResultReason
inst:Alice school:Enrolleepass
inst:Bob school:Enrolleepass
inst:Claireschool:Enrolleefailfoaf:age 12 less than 13.
inst:Don school:EnrolleefailNo ex:hasGuardian supplied.

ShEx Model and Terminology

Validating RDF Data

In the Shape Expressions model, RDF data is seen from the standpoint of its structural components, or abstract syntax. An RDF graph is a collection of triples. A triple is a data structure composed of three RDF terms. An RDF term may be an IRI, blank node (BNode), or literal. In a triple, RDF terms are arranged in a fixed order, or directed arc, from subject to predicate to object. A node in the subject position has an outgoing arc and a node in the object position has an incoming arc. RDF data may be serialized in any of several interchangeable concrete syntaxes designed for a variety of application requirements.

A ShEx schema is a collection of shape expressions that describe an RDF graph in terms of these abstract-syntactic components. A shape expression is a logical combination of node constraints and shapes. Node constraints define the characteristics of matching RDF nodes. A shape describes a collection of RDF triples touching a given RDF node in terms of triple constraints. Triple constraints specify matching RDF triples in terms of their predicates, direction (whether they are incoming or outgoing arcs with respect to a node), cardinality (how many triples should match), or value (characteristics of its subject or object node).

In the ShEx model, a given RDF data graph is tested against a ShEx schema to yield a validation result. In the example above, the RDF nodes inst:Alice, inst:Bob, inst:Claire and inst:Don are tested against the ShEx shape school:Enrollee. In the validation process, each of four nodes in the RDF data is treated, in turn, as a focus node, and triples involving that node are tested against a triple constraint which, in turn, includes the node constraint IRI. This validation process is controlled by a shape map that specifies how the constructs of a ShEx schema relate to the components of RDF data graphs. There are many ways to populate a shape map with nodes to be validated: through queries, APIs, protocols, or simple enumeration.

ShEx may be serialized using any of three interchangeable concrete syntaxes: Shape Expressions Compact Syntax or ShExC, a compact syntax meant for human eyes and fingers; ShExJ, a JSON-LD [[json-ld]] (Javascript) syntax meant for machine processing; and ShExR, the RDF interpretation of ShExJ expressed in RDF Turtle syntax [[turtle]]. The ShEx schemas in this primer may be viewed in ShExC syntax (by default) or JSON-LD syntax by pressing 'c' or 'j' in the browser or by clicking on the following radio buttons:

.

Basic Terminology

ShEx schema
A collection of shape expressions.
shape expression
Shapes and node constraints, possibly combined with AND, OR, and NOT expressions.
focus node
A RDF data node of interest that is examined during validation.
shape
A triple expression aginst which a focus node is tested to see of all incoming or outgoing arcs matching predicates in the triple expression have appropriate number (cardinality) and values.
triple expression
A collection of triple constraints which may be combined in groups or choices.
triple constraint
A constraint with a given predicate which is tested against RDF triples with that predicate and the focus node as subject (or object, for inverse triple constraints).
node constraint
A collection of constraints on a given focus node.
value constraint
A shape expression used in a triple constraint. "Value constraint" (or "value constraint on a property") is a shorthand way of saying: "node constraint on the RDF node of the object associated in a triple with a given predicate". For inverse triple constraints, this shorthand is: "node constraint on the RDF node of the subject associated in a triple with a given predicate".
value set
A set of values composed of RDF terms and substrings.
value
A shorthand designation for the RDF node at the opposite end of an RDF data triple from a focus node. In typical usage, this is the object of a triple, or for inverse triple constraints, its subject.
constraint
A restriction on the set of permissible nodes or triples.
shape map
A collection of pairs of RDF data nodes and ShEx shapes that is used for invoking validation and reporting results.
ShExC
A compact syntax meant for human eyes and fingers.
ShExJ
A JSON-LD [[json-ld]] representation meant for machine processing.
ShExR
The RDF interpretation of ShExJ expressable in any RDF syntax.

ShEx Essentials

This document uses a running example illustrated by the following graph in which an Issue is submitted by some person and may be reproduced by the same person or someone else. These issues can have a status of unassigned or assigned.

image/svg+xml some:Issue some:User some:Employee ex:state ex:assigned ex:submittedBy ex:reproducedBy mailto:bob@... foaf:name Bob Smith foaf:mbox mailto:joe@... foaf:givenName Joe foaf:mbox foaf:familyName Jones

Node Constraints

The following node constraints can be used alone, or in combination.

literal datatype
A node constraint that identifies the datatype of an RDF literal.
my:UserShape {
  foaf:name xsd:string
}
{ "my:UserShape": { "type": "Shape",
  "expression": {
    "type": "TripleConstraint", "predicate": "foaf:name",
    "value": { "type": "NodeConstraint", "datatype": "xsd:string" } } } }
literal facet
A node constraint that applies XML Schema constraining facets, including numeric facets, which apply only to numeric RDF literals (MinInclusive, MinExclusive, MaxInclusive, MaxExclusive, TotalDigits, FractionDigits) and string facets, which apply to all RDF literals (Length, MinLength, MaxLength, Pattern). In the ShExC syntax, facet names are not case-sensitive.
my:UserShape {
  ex:shoeSize xsd:float MinInclusive 5.5 MaxInclusive 12.5
}
{ "my:UserShape": { "type": "Shape",
  "expression": { "type": "TripleConstraint", "predicate": "ex:shoeSize",
    "value": { "type": "NodeConstraint", "datatype": "http://www.w3.org/2001/XMLSchema#float",
               "mininclusive": 5.5, "maxinclusive": 12.5 } } } }
node kind
A node constraint that specifies whether an RDF data node is of kind Literal, IRI, BNode, or NonLiteral, a union of the kinds IRI and BNode. In the ShExC syntax, node kinds are not case-sensitive.
my:UserShape {
  foaf:mbox IRI
}
{ "my:UserShape": { "type": "Shape",
  "expression": {
    "type": "TripleConstraint", "predicate": "foaf:mbox",
    "value": { "type": "NodeConstraint", "nodeKind": "IRI" } } } }
value set
Enumerates a set of specific expected values.
my:IssueShape {
  ex:state [ex:unassigned ex:assigned]
}
{ "my:IssueShape": { "type": "Shape",
  "expression": { "type": "TripleConstraint", "predicate": "ex:status",
    "value": { "type": "NodeConstraint", "values": [ "ex:unassigned", "ex:assigned" ] } } } }
my:IssueShape {
  ex:state ["unassigned" "assigned"]
}
{ "my:IssueShape": { "type": "Shape",
  "expression": { "type": "TripleConstraint", "predicate": "ex:status",
    "value": { "type": "NodeConstraint", "values": [ { "value": "unassigned" }, { "value": "assigned" } ] } } } }
my:IssueShape {
  ex:state [0 1]
}
{ "my:IssueShape": { "type": "Shape",
  "expression": { "type": "TripleConstraint", "predicate": "ex:status",
    "value": { "type": "NodeConstraint", "values": [ { "value": "0" }, { "value": "1" } ] } } } }
value shape
Asserts that the value is described by another shape, e.g.
my:IssueShape {
  ex:reportedBy @my:UserShape
}
{ "my:IssueShape": { "type": "Shape",
  "expression": { "type": "TripleConstraint", "predicate": "ex:reportedBy",
      "value": { "type": "ShapeRef", "reference": "my:PersonShape" } } } }

Triple Constraints

Triple constraints are evaluated against all of the triples in an RDF graph that touch a given data node. The RDF data node examined during validation is called the focus node. Triple constraints identify a predicate and describe matching triples as having the focus node as the subject (or object). (The exception is the inverse triple constraint, which describes matching triples as having the focus node as the object.) Triple constraints specify a cardinality (how many matching triples are expected or permitted). They may include a value constraint, which is a node constraint describing the object of matching triples (or subject, in the case of inverse triple constraints).

The following simple example has one shape, my:UserShape, with a single triple constraint on the property foaf:name. A value constraint within the triple constraint says that the object of a foaf:name triple must be an RDF literal with a datatype of xsd:string. A conforming node in an RDF data graph will have exactly one such triple.

PREFIX ex: <http://ex.example/#>
PREFIX my: <http://my.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX xsd: <http://www.w3.org/2001/XMLSchema#>

my:UserShape {
  foaf:name xsd:string
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://my.example/#UserShape",
      "type": "Shape",
      "expression": {
        "type": "TripleConstraint",
        "predicate": "http://xmlns.com/foaf/0.1/name",
        "valueExpr": {
          "type": "NodeConstraint",
          "datatype": "http://www.w3.org/2001/XMLSchema#string" } } }
  ] }
PREFIX ex: <http://ex.example/#>
PREFIX inst: <http://example.com/users/>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX xsd: <http://www.w3.org/2001/XMLSchema#>

inst:User1                              
    foaf:name  "Bob Smith"^^xsd:string .

inst:User2                              
    foaf:name  "Bob Smith" .            
inst:User3                              
    foaf:name  "Joe Jones"^^xsd:string ;
    foaf:name  "J. Jones"^^xsd:string . 

inst:User4                              
    foaf:name  "Bob Smith"^^xsd:anyURI .
NodeShapeResultReason
inst:User1my:UserShapepass
inst:User2my:UserShapepassLiterals in Turtle have a default datatype of xsd:string.
inst:User3my:UserShapefailExpected exactly one foaf:name arc.
inst:User4my:UserShapefailExpected an xsd:string, not a xsd:anyURI.

The following regular expression conventions are used to specify cardinalities other than the default of "exactly one" (see the example in Quick Start, with cardinality "one or two").

  • "+" - one or more
  • "*" - zero or more
  • "?" - zero or one
  • "{m}" - exactly m
  • "{m,n}" - at least m, no more than n

Grouping Triple Constraints in Shapes

The examples above show just one triple constraint per shape. In practice, most shape declarations will include multiple constraints. In the ShExC syntax, triple constraints are separated by a semi-colon. In the following example, the shape my:IssueShape will match:

  • exactly one data triple with predicate ex:state and a value in the value set ex:unassigned or ex:assigned,
  • exactly one data triple with predicate ex:reportedBy and a value matching the shape labeled my:UserShape.

The shape labeled my:UserShape must have:

  • exactly one triple constraint on predicate foaf:name with a value of the literal datatype xsd:string
  • one or more triple constraints on predicate foaf:mbox with a node kind of IRI.
PREFIX ex: <http://ex.example/#>
PREFIX my: <http://my.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX xsd: <http://www.w3.org/2001/XMLSchema#>

my:IssueShape {
  ex:state [ex:unassigned ex:assigned];
  ex:reportedBy @my:UserShape
}

my:UserShape {
  foaf:name xsd:string;
  foaf:mbox IRI+
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://my.example/#IssueShape",
      "type": "Shape",
      "expression": {
        "type": "EachOf",
        "expressions": [
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#state",
            "valueExpr": {
              "type": "NodeConstraint",
              "values": [
                "http://ex.example/#unassigned",
                "http://ex.example/#assigned"
              ] } },
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#reportedBy",
            "valueExpr": "http://my.example/#UserShape" }
        ] } },
    { "id": "http://my.example/#UserShape",
      "type": "Shape",
      "expression": {
        "type": "EachOf",
        "expressions": [
          { "type": "TripleConstraint",
            "predicate": "http://xmlns.com/foaf/0.1/name",
            "valueExpr": {
              "type": "NodeConstraint",
              "datatype": "http://www.w3.org/2001/XMLSchema#string" } },
          { "type": "TripleConstraint", "min": 1, "max": -1,
            "predicate": "http://xmlns.com/foaf/0.1/mbox",
            "valueExpr": {
              "type": "NodeConstraint",
              "nodeKind": "iri" } }
        ] } }
  ] }
PREFIX ex: <http://ex.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX inst: <http://inst.example/#>

inst:Issue1 a ex:Issue ;
    ex:state        ex:unassigned ;
    ex:reportedBy   inst:User2 .

inst:User2 a foaf:Person ;
    foaf:name       "Bob Smith" ;
    foaf:mbox       <mailto:bob@example.org> ;
    foaf:mbox       <mailto:rs@example.org> .
PREFIX ex: <http://ex.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX inst: <http://inst.example/#>

inst:Issue3 a ex:Issue ;
    ex:state        ex:unsinged ; # <-- typo
    ex:reportedBy   inst:User4 .

inst:User4 a foaf:Person ;
    foaf:name       "Bob Smith", "Robert Smith" ;
    foaf:mbox       <mailto:bob@example.org> ;
    foaf:mbox       <mailto:rs@example.org> .
NodeShapeResultReason
inst:Issue1my:IssueShapepass
inst:User2 my:UserShapepass
inst:Issue3my:IssueShapefailex:unsinged not in range of ex:status.
inst:User4 my:UserShapefailMax cardinality of foaf:name exceeded.

Note that a shape composed of triple expressions with a minimum cardinality of zero will trivially match any RDF node that does not have outgoing arcs.

PREFIX my: <http://my.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX ex: <http://ex.example/#>

my:IssueShape {
  ex:state [ex:unassigned ex:assigned];
  ex:reportedBy @my:UserShape
}

my:UserShape {
  foaf:name LITERAL?;
  foaf:mbox IRI*
}
{ "@context": "https://shexspec.github.io/context.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://my.example/#IssueShape",
      "type": "Shape",
      "expression": {
        "type": "EachOf",
        "expressions": [
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#state",
            "valueExpr": {
              "type": "NodeConstraint",
              "values": [
                "http://ex.example/#unassigned",
                "http://ex.example/#assigned"
              ] } },
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#reportedBy",
            "valueExpr": "http://my.example/#UserShape" }
        ] } },
    { "id": "http://my.example/#UserShape",
      "type": "Shape",
      "expression": {
        "type": "EachOf",
        "expressions": [
          { "type": "TripleConstraint", "min": 0, "max": 1,
            "predicate": "http://xmlns.com/foaf/0.1/name",
            "valueExpr": {
              "type": "NodeConstraint",
              "nodeKind": "literal" }
          },
          { "type": "TripleConstraint", "min": 0, "max": -1,
            "predicate": "http://xmlns.com/foaf/0.1/mbox",
            "valueExpr": {
              "type": "NodeConstraint",
              "nodeKind": "iri" } }
        ] } }
  ] }
PREFIX inst: <http://inst.example/#>
PREFIX ex: <http://ex.example/#>

inst:Issue1 a ex:Issue ;
    ex:state        ex:unassigned ;
    ex:reportedBy   "Bob Smith" .
NodeShapeResultReason
inst:Issue1my:IssueShapepass
"Bob Smith" my:UserShapepassMatched 0 foaf:name and 0 foaf:mbox arcs.

For both properties in my:UserShape, the minimum number of triples is zero. Any RDF data node will match this shape as long as it does not have conflicting ex:state or ex:reportedBy properties. Since no RDF literal may be the subject of RDF triples, any literal would satisfy this shape. This can lead to unintended results and confusing errors.

Combining Value Constraints

Value constraints can be combined, for example to say that an issue conforms to a given shape and is identified by an IRI matching a certain pattern.

PREFIX ex: <http://ex.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX xsd: <http://www.w3.org/2001/XMLSchema#>
PREFIX my: <http://my.example/#>

my:IssueShape {
  ex:state [ex:accepted ex:resolved];
  ex:reproducedBy @my:EmployeeShape
}

my:EmployeeShape IRI                      
 /^http:\/\/hr\.example\/id#[0-9]+/ {      
  foaf:name LITERAL;                      
  ex:department [ex:ProgrammingDepartment]
}                                         
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://my.example/#IssueShape",
      "type": "Shape",
      "expression": {
        "type": "EachOf",
        "expressions": [
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#state",
            "valueExpr": {
              "type": "NodeConstraint",
              "values": [
                "http://ex.example/#accepted",
                "http://ex.example/#resolved"
              ]
            } },
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#reproducedBy",
            "valueExpr": "http://my.example/#EmployeeShape" }
        ] } },
    { "id": "http://my.example/#EmployeeShape",
      "type": "ShapeAnd",
      "shapeExprs": [
        { "type": "NodeConstraint",
          "nodeKind": "iri",
          "pattern": "^http://hr.example/id#[0-9]+" },
        { "type": "Shape",
          "expression": {
            "type": "EachOf",
            "expressions": [
              {
                "type": "TripleConstraint",
                "predicate": "http://xmlns.com/foaf/0.1/name",
                "valueExpr": {
                  "type": "NodeConstraint",
                  "nodeKind": "literal" } },
              {
                "type": "TripleConstraint",
                "predicate": "http://ex.example/#department",
                "valueExpr": {
                  "type": "NodeConstraint",
                  "values": [
                    "http://ex.example/#ProgrammingDepartment"
                  ] } }
            ] } }
      ] }
  ] }
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX inst: <http://inst.example/#>
PREFIX ex: <http://ex.example/#>

inst:Issue1
  ex:state ex:accepted ;
  ex:reproducedBy <http://hr.example/id#123> .

<http://hr.example/id#123>                  
  foaf:name "Bob Smith" ;                   
  ex:department ex:ProgrammingDepartment .  
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX inst: <http://inst.example/#>
PREFIX ex: <http://ex.example/#>

inst:Issue1
  ex:state ex:accepted ;
  ex:reproducedBy <http://hr.example/id#abc> .

<http://hr.example/id#abc>                  
  foaf:name "Bob Smith" ;                   
  ex:department ex:ProgrammingDepartment .  
NodeShapeResultReason
inst:User1my:UserShapepass
<http://hr.example/id#123>my:EmployeeShapepass
inst:User3my:UserShapefailObject of ex:reproducedBy does not match my:EmployeeShape.
<http://hr.example/id#abc>my:EmployeeShapefail<http://hr.example/id#abc> does not match regular expression.

Nesting Shapes

In the examples above, value expressions referenced shape expressions with the '@' symbol. It is also possible to write "anonymous" shapes directly in the value expression. In the example below, the value of the triple constraint on predicate ex:reportedBy is a shape comprised of triples constraints on the predicates foaf:name and foaf:mbox. In ShExC syntax, this anonymous shape is enclosed in curly brackets. In ShExJ, it is contained in the triple constraint's valueExpr property.

PREFIX my: <http://my.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX ex: <http://ex.example/#>

my:IssueShape {
  ex:state [ex:unassigned ex:assigned];
  ex:reportedBy {
    foaf:name LITERAL;
    foaf:mbox IRI+
  }
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://my.example/#IssueShape",
      "type": "Shape",
      "expression": {
        "type": "EachOf",
        "expressions": [
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#state",
            "valueExpr": {
              "type": "NodeConstraint",
              "values": [
                "http://ex.example/#unassigned",
                "http://ex.example/#assigned"
              ] } },
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#reportedBy",
            "valueExpr": {
              "type": "Shape",
              "expression": {
                "type": "EachOf",
                "expressions": [
                  { "type": "TripleConstraint",
                    "predicate": "http://xmlns.com/foaf/0.1/name",
                    "valueExpr": {
                      "type": "NodeConstraint",
                      "nodeKind": "literal" } },
                  {
                    "type": "TripleConstraint", "min": 1, "max": -1,
                    "predicate": "http://xmlns.com/foaf/0.1/mbox",
                    "valueExpr": {
                      "type": "NodeConstraint",
                      "nodeKind": "iri" } }
                ] } } }
        ] } }
  ] }

Expressions with Choices

Most schema languages offer a way to express choices. In the following example, a user has either a simple name (foaf:name), or a composite name (foaf:familyName with one or more foaf:givenNames). The user must have exactly one foaf:mbox.

PREFIX my: <http://my.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>

my:UserShape {
  (                              
     foaf:name LITERAL
                                 
    |                            
      foaf:givenName LITERAL+;
      foaf:familyName LITERAL
  );                             
  foaf:mbox IRI
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://my.example/#UserShape",
      "type": "Shape",
      "expression": {
        "type": "EachOf",
        "expressions": [
          { "type": "OneOf",
            "expressions": [
              { "type": "TripleConstraint",
                "predicate": "http://xmlns.com/foaf/0.1/name",
                "valueExpr": {
                  "type": "NodeConstraint",
                  "nodeKind": "literal" } },
              { "type": "EachOf",
                "expressions": [
                  { "type": "TripleConstraint", "min": 1, "max": -1,
                    "predicate": "http://xmlns.com/foaf/0.1/givenName",
                    "valueExpr": {
                      "type": "NodeConstraint",
                      "nodeKind": "literal" } },
                  { "type": "TripleConstraint",
                    "predicate": "http://xmlns.com/foaf/0.1/familyName",
                    "valueExpr": {
                      "type": "NodeConstraint",
                      "nodeKind": "literal" } }
                ] }
            ] },
          { "type": "TripleConstraint",
            "predicate": "http://xmlns.com/foaf/0.1/mbox",
            "valueExpr": {
              "type": "NodeConstraint",
              "nodeKind": "iri" } }
        ] } }
  ] }
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX inst: <http://inst.example/#>

inst:User1 a foaf:Person ;
    foaf:name       "Alice Walker" ;
    foaf:mbox       <mailto:awalker@example.org> .

inst:User2 a foaf:Person ;
    foaf:givenName  "Robert" ;
    foaf:givenName  "Paris" ;
    foaf:familyName "Moses" ;
    foaf:mbox       <mailto:rpmoses@example.org> .
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
PREFIX inst: <http://inst.example/#>

inst:User3 a foaf:Person ;
    foaf:givenName  "Smith" ;
    foaf:mbox       <mailto:bobs@example.org> .

inst:User4 a foaf:Person ;
    foaf:name       "A" ;
    foaf:givenName  "B" ;
    foaf:familyName "C" ;
    foaf:mbox       <mailto:bobs@example.org> .

inst:User5 a foaf:Person ;
    foaf:name       "A" ;
    foaf:givenName  "B" ;
    foaf:mbox       <mailto:bobs@example.org> .
NodeShapeResultReason
inst:User1my:UserShapepass
inst:User2my:UserShapepass
inst:User3my:UserShapefailExpected a foaf:familyName arc.
inst:User4my:UserShapefailExpected only one disjunction to pass.
inst:User5my:UserShapefailExtra foaf:givenName arc.

Value Sets

A value set is a value constraint for enumerating the set of permissible RDF nodes. The values can be IRIs, literals or language tags. In the example below, "[@en @fr]" matches any RDF literal with a language tag of "en" or "fr".

my:IssueShape {
  ex:state [ex:unassigned ex:assigned]
}
{ "my:IssueShape": { "type": "Shape",
  "expression": { "type": "TripleConstraint", "predicate": "ex:status",
    "value": { "type": "NodeConstraint", "values": [ "ex:unassigned", "ex:assigned" ] } } } }
my:IssueShape {
  ex:state ["unassigned" "assigned"]
}
{ "my:IssueShape": { "type": "Shape",
  "expression": { "type": "TripleConstraint", "predicate": "ex:status",
    "value": { "type": "NodeConstraint", "values": [ "\"unassigned\'", "\"assigned\"" ] } } } }
my:IssueShape {
  ex:label [@en @fr]
}
{ "my:IssueShape": { "type": "Shape",
  "expression": { "type": "TripleConstraint", "predicate": "ex:status",
    "value": { "type": "NodeConstraint", "values": [ "\"unassigned\'", "\"assigned\"" ] } } } }

Fixed values are represented as value sets with one member. For example, a required type triple can be expressed in the following two ways using the ShExC syntax:

my:UserShape {
  rdf:type [foaf:Person]
}
{ "my:IssueShape": { "type": "Shape",
  "expression": { "type": "TripleConstraint", "predicate": "rdf:type",
    "value": { "type": "NodeConstraint", "values": [ "foaf:Person" ] } } } }
my:UserShape {
  a [foaf:Person]
}

A value set can also contain stems for IRIs, strings and language tags. An IRI orx string stem matches any IRI or string that starts with the stem. A language tag stem matches any literal with a language tag that starts with the stem. These are flagged as stems by appending a tilde ("~").

The last triple constraint in my:IssueShape below is an inverse triple constraint. These are described in the next section. This inverse triple constraint states that every my:IssueShape must have an incoming arc from one of two nodes: my:Product1 or my:Product2.

PREFIX ex: <http://a.example/#>
PREFIX my: <http://my.example/#>
PREFIX excodes: <http://a.example/codes#>
PREFIX auxterms: <http://aux.example/terms#>

my:IssueShape {
  ex:status   [ excodes:~ auxterms:~ ];
  ex:mood     [ @en~ - @en-fr ];
 ^ex:hasIssue [ my:Product1 my:Product2 ]
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://my.example/#IssueShape",
      "type": "Shape",
      "expression": {
        "type": "EachOf",
        "expressions": [
          { "type": "TripleConstraint",
            "predicate": "http://a.example/#status",
            "valueExpr": {
              "type": "NodeConstraint",
              "values": [
                { "type": "IriStemRange",
                  "stem": "http://a.example/codes#" },
                { "type": "IriStemRange",
                  "stem": "http://aux.example/terms#" }
              ] } },
          { "type": "TripleConstraint",
            "predicate": "http://a.example/#mood",
            "valueExpr": {
              "type": "NodeConstraint",
              "values": [
                {
                  "type": "LanguageStemRange",
                  "stem": { "value": "en" },
                  "exclusions": [
                    { "value": "en-fr" }
                  ] }
              ] } },
          { "type": "TripleConstraint",
            "inverse": true,
            "predicate": "http://a.example/#hasIssue",
            "valueExpr": {
              "type": "NodeConstraint",
              "values": [
                "http://my.example/#Product1",
                "http://my.example/#Product2"
              ] } }
        ] } }
  ] }
PREFIX ex: <http://a.example/#>
PREFIX my: <http://my.example/#>
PREFIX excodes: <http://a.example/codes#>
PREFIX auxterms: <http://aux.example/terms#>
PREFIX inst: <http://inst.example/#>

inst:Issue1 ex:status   excodes:resolved ;
            ex:mood     "hungry"@en-gb .
my:Product2 ex:hasIssue inst:Issue1 .
PREFIX ex: <http://a.example/#>
PREFIX my: <http://my.example/#>
PREFIX excodes: <http://a.example/codes#>
PREFIX auxterms: <http://aux.example/terms#>
PREFIX inst: <http://inst.example/#>

inst:Issue2 ex:status   ex:done ;
            ex:mood     "angry"@en-fr .
my:Product1 ex:hasIssue inst:Issue2 .

inst:Issue3 ex:status  auxterms:done.
my:Product3 ex:hasIssue inst:Issue3 .
NodeShapeResultReason
inst:Issue1my:IssueShapepass
inst:Issue2my:IssueShapefailex:done not in range of ex:status.
Excluded language tag for ex:mood.
inst:Issue3my:IssueShapefailmy:Product3 not in range of ex:hasIssue.

While IRI, string and language tag stems match any terms starting with the stem, one may wish to exclude specific terms or term stems. Stem exclusions are expressed by following a stem with one or more exclusions. An exclusion consists of a minus ("-") followed by an IRI, IRI stem, string, string stem, language tag, or language tag stem.

PREFIX ex: <http://a.example/#>
PREFIX my: <http://my.example/#>
PREFIX excodes: <http://a.example/codes#>
PREFIX auxterms: <http://aux.example/terms#>

my:IssueShape {
  ex:status [
      excodes:~ - excodes:unassigned - excodes:assigned
      auxterms:~ - <http://aux.example/terms#med_>~
  ]
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://my.example/#IssueShape",
      "type": "Shape",
      "expression": {
        "type": "TripleConstraint",
        "predicate": "http://a.example/#status",
        "valueExpr": {
          "type": "NodeConstraint",
          "values": [
            { "type": "IriStemRange",
              "stem": "http://a.example/codes#",
              "exclusions": [
                "http://a.example/codes#unassigned",
                "http://a.example/codes#assigned"
              ] },
            { "type": "IriStemRange",
              "stem": "http://aux.example/terms#",
              "exclusions": [
                { "type": "IriStem",
                  "stem": "http://aux.example/terms#med_" }
              ] }
          ] } } }
  ] }
PREFIX ex: <http://a.example/#>
PREFIX my: <http://my.example/#>
PREFIX excodes: <http://a.example/codes#>
PREFIX auxterms: <http://aux.example/terms#>
PREFIX inst: <http://inst.example/#>

inst:Issue2 ex:status  excodes:resolved .
                                         
inst:Issue3 ex:status  excodes:assigned.
                                         
inst:Issue4 ex:status  auxterms:med_sniffles.
                                         
inst:Issue5 ex:status  ex:done.
NodeShapeResultReason
inst:Issue2my:IssueShapepass
inst:Issue3my:IssueShapefailexcodes:assigned excluded.
inst:Issue4my:IssueShapefailauxterms:med_… terms excluded.
inst:Issue5my:IssueShapefailex:done not in range of ex:status.

A period (.) can be used with exclusions to say that any term is permitted except the exclusions.

PREFIX ex: <http://a.example/#>
PREFIX my: <http://my.example/#>
PREFIX excodes: <http://a.example/codes#>
PREFIX auxterms: <http://aux.example/terms#>

my:IssueShape {
  ex:status [
    . - excodes:bad- - excodes:assigned
  ]
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "shapes": [
    { "id": "http://my.example/#IssueShape",
      "type": "Shape",
      "expression": {
        "type": "TripleConstraint",
        "predicate": "http://a.example/#status",
        "valueExpr": {
          "type": "NodeConstraint",
          "values": [
            { "type": "IriStemRange",
              "stem": {
                "type": "Wildcard" },
              "exclusions": [
                "http://a.example/codes#bad-",
                "http://a.example/codes#assigned"
              ] }
          ] } } }
  ] }
PREFIX ex: <http://a.example/#>
PREFIX my: <http://my.example/#>
PREFIX excodes: <http://a.example/codes#>
PREFIX auxterms: <http://aux.example/terms#>
PREFIX inst: <http://inst.example/#>

inst:Issue1 ex:status  ex:random .
PREFIX ex: <http://a.example/#>
PREFIX my: <http://my.example/#>
PREFIX excodes: <http://a.example/codes#>
PREFIX auxterms: <http://aux.example/terms#>
PREFIX inst: <http://inst.example/#>

inst:Issue2 ex:status  excodes:assigned.
NodeShapeResultReason
inst:Issue1my:IssueShapepass
inst:Issue2my:IssueShapefailexcodes:assigned is excluded.

Advanced Concepts

Inverse Triple Constraints

Placing a regular triple constraint on predicate ex:reportedIssue into my:UserShape effectively requires all users to have reported an issue.

my:IssueShape {
  ex:state [ex:unassigned ex:assigned]
}

my:UserShape {
  foaf:name LITERAL;
  foaf:mbox IRI+;
  ex:reportedIssue @my:IssueShape
}
{ "type": "Schema",
  "shapes": {
    "my:IssueShape": { "type": "Shape",
      "expression": { "type": "group",
        "expressions": [
          { "type": "TripleConstraint",                   
            "predicate": "ex:state",                      
            "value": { "type": "NodeConstraint",              
              "values": [ "ex:unassigned", "ex:assigned" ]
            }                                             
          }
        ]
      }
    },
    "my:UserShape": { "type": "Shape",
      "expression": { "type": "group",
        "expressions": [
          { "type": "TripleConstraint",                   
            "predicate": "foaf:name",                     
            "value": {                
              "type": "NodeConstraint",   
              "datatype": "xsd:string"
            }                         
          },                                              
          { "type": "TripleConstraint",                   
            "predicate": "foaf:mbox",                     
            "value": { "type": "NodeConstraint",              
              "nodeKind": "iri"                           
            },                              
            "min": 1, "max": -1
          },                                              
          { "type": "TripleConstraint",                      
            "predicate": "ex:reportedIssue", "inverse": false,
            "value": { "type": "ShapeRef",                 
              "reference": "my:IssueShape"                   
            }                                                
          }                                                  
        ]
      }
    }
  }
}
inst:Issue1 a ex:Issue ;
    ex:state        ex:unassigned .

inst:User2 a foaf:Person ;                     
    foaf:name       "Bob Smith" ;              
    foaf:mbox       <mailto:bob@example.org> ; 
    foaf:mbox       <mailto:rs@example.org> .  

inst:User3 a foaf:Person ;
    foaf:name       "Bob Smith" ;
    ex:reportedIssue inst:Issue1 ;
    foaf:mbox       <mailto:bob@example.org> ;
    foaf:mbox       <mailto:rs@example.org> .
NodeShapeResultReason
inst:Issue1my:IssueShapepass
inst:User2my:UserShapefailExpected ex:reportedIssue property.
inst:User3my:UserShapepass

However, it may be more precise to require that for every issue, there is some user who reported it. This could be expressed in the data by describing every issue as being reported by (ex:reportedBy) a user. Alternatively, an issue could be described as the object of a triple with predicate ex:reportedIssue. A triple constraint for such an incoming arc may expressed in the ShExC syntax by prefixing the constraint with a caret (^) and in the ShExJ syntax with "inverse": true.

my:IssueShape {
  ex:state [ex:unassigned ex:assigned];
 ^ex:reportedIssue @my:UserShape
}

my:UserShape {
  foaf:name LITERAL;
  foaf:mbox IRI+
}
{ "type": "Schema",
  "shapes": {
    "my:IssueShape": { "type": "Shape",
      "expression": { "type": "group",
        "expressions": [
          { "type": "TripleConstraint",                   
            "predicate": "ex:state",                      
            "value": { "type": "NodeConstraint",              
              "values": [ "ex:unassigned", "ex:assigned" ]
            }                                             
          },                                              
          { "type": "TripleConstraint",                      
            "predicate": "ex:reportedIssue", "inverse": true,
            "value": { "type": "ShapeRef",                   
              "reference": "my:IssueShape"                   
            }                                                
          }                                                  
        ]
      }
    },
    "my:UserShape": { "type": "Shape",
      "expression": { "type": "group",
        "expressions": [
          { "type": "TripleConstraint",                   
            "predicate": "foaf:name",                     
            "value": {                
              "type": "NodeConstraint",   
              "datatype": "xsd:string"
            }                         
          },                                              
          { "type": "TripleConstraint",                   
            "predicate": "foaf:mbox",                     
            "value": { "type": "NodeConstraint",              
              "nodeKind": "iri"                           
            },                              
            "min": 1, "max": -1            
          }                                               
        ]
      }
    }
  }
}
inst:Issue1 a ex:Issue ;
    ex:state        ex:unassigned .
inst:User1 a foaf:Person ;
    foaf:name       "Bob Smith" ;
    ex:reportedIssue inst:Issue1 ;
    foaf:mbox       <mailto:bob@example.org> ;
    foaf:mbox       <mailto:rs@example.org> .
inst:Issue2 a ex:Issue ;
    ex:state         ex:unassigned ;
    ex:reportedBy    inst:User2 .
inst:User2 a foaf:Person ;
    foaf:name        "Bob Smith" ;
    foaf:mbox        <mailto:bob@example.org> ;
    foaf:mbox        <mailto:rs@example.org> .

inst:Issue3 a ex:Issue ;
    ex:state         ex:unassigned ;
    ex:reportedIssue inst:User3 .
inst:User3 a foaf:Person ;
    foaf:name        "Bob Smith" ;
    foaf:mbox        <mailto:bob@example.org> ;
    foaf:mbox        <mailto:rs@example.org> .

inst:Issue4 a ex:Issue ;
    ex:state         ex:unassigned .
inst:User4 a foaf:Person ;
    foaf:name        "Robert" ;
    foaf:name        "Bob Smith" ;
    foaf:mbox        <mailto:bob@example.org> ;
    ex:reportedIssue inst:Issue4 .
NodeShapeResultReason
inst:Issue1my:IssueShapepass
inst:Issue2my:IssueShapefailMissing incoming ex:reportedIssue property.
inst:Issue3my:IssueShapefailex:reportedIssue is in the wrong direction.
inst:Issue4my:IssueShapefailSubject of ex:reportedIssue does not match my:UserShape;
inst:User4my:UserShapefailMax cardinality of foaf:name exceeded.

Negative Triple Constraints

A schema may specify triples that must not appear in the data. For example, suppose there were a need for free-standing issues -- issues having no ex:component relationships, incoming or outgoing, with any other issues. This can be expressed by setting the cardinality of triple constraints on the predicate ex:component to zero, meaning that they should match zero triples in the data. That the shape must also not be the target of incoming triples with the predicate ex:component is expressed by prefixing the triple constraint with a caret (^).

my:SolitaryIssueShape {
  ex:state [ex:unassigned ex:assigned];
  ex:component . {0} ;
 ^ex:component . {0}
}
TODO
inst:Issue1 a ex:Issue ;                 
    rdfs:label      "smokes too much" ;  
    ex:state        ex:unassigned .      

inst:Issue2 a ex:Issue ;                 
    dc:creator      "Alice" ;            
    ex:state        ex:unassigned ;      
    ex:component    inst:Issue3 .        
                                         
inst:Issue3 a ex:Issue ;                 
    rdfs:label      "smokes too little" ;
    ex:state        ex:unassigned .      
NodeShapeResultReason
inst:Issue1my:SolitaryIssueShapepass
inst:Issue2my:SolitaryIssueShapefailExpected zero outgoing ex:component arcs.
inst:Issue3my:SolitaryIssueShapefailExpected zero incoming ex:component arcs.

Closing Shapes

Services backed by an RDF triple store may simply accept and store any triples not described in the schema; in such a case, the schema may only identify triples that the service understands and manipulates. At the other extreme are services or databases that accept or emit only the data structures described in a schema. In a ShEx schema, a shape may be defined to match only RDF data nodes that have outgoing triples matching the given set of triple constraints and no other outgoing triples. A shape declaration can be qualified to mean "this set of outgoing triples and no others" by using the keyword CLOSED.

my:OpenUserShape {
  foaf:name xsd:string;
  foaf:mbox IRI
}

my:ClosedUserShape CLOSED {
  foaf:name xsd:string;
  foaf:mbox IRI
}
{ "type": "Schema",
  "shapes": [
    { "type": "Shape", "id": "my:OpenUserShape"
      "expression": { "type": "group",
        "expressions": [
          { "type": "TripleConstraint",                   
            "predicate": "foaf:name",                     
            "value": {                                    
              "type": "NodeConstraint",                   
              "datatype": "xsd:string"                    
            }                                             
          },                                              
          { "type": "TripleConstraint",                   
            "predicate": "foaf:mbox",                     
            "value": { "type": "NodeConstraint",          
              "nodeKind": "iri"                           
            }                                             
          }                                               
        ]
      }
    },
    { "type": "Shape", "id": "my:ClosedUserShape",
      "closed": "true",
      "expression": { "type": "group",
        "expressions": [
          { "type": "TripleConstraint",                   
            "predicate": "foaf:name",                     
            "value": {                                    
              "type": "NodeConstraint",                   
              "datatype": "xsd:string"                    
            }                                             
          },                                              
          { "type": "TripleConstraint",                   
            "predicate": "foaf:mbox",                     
            "value": { "type": "NodeConstraint",          
              "nodeKind": "iri"                           
            }                                             
          }                                               
        ]
      }
    }
  ]
}
inst:User1
    foaf:name       "Bob Smith" ;
    foaf:mbox       <mailto:rs@example.org> .

inst:User2 a foaf:Person ;
    foaf:name       "Bob Smith" ;
    foaf:mbox       <mailto:bob@example.org> .

inst:User2 foaf:knows inst:User1 .
NodeShapeResultReason
inst:User1my:OpenUserShapepass
inst:User2my:OpenUserShapepass
inst:User1my:ClosedUserShapepass
inst:User2my:ClosedUserShapefailUnexpected rdf:type and foaf:knows arcs.

The triple inst:User2 foaf:knows inst:User1 makes inst:User2 non-conformant with my:ClosedUserShape, but it does not make inst:User1 non-conformant because CLOSED applies only to outgoing arcs.

Permitting Extra Properties

If a shape contains a triple constraint with predicate P, the shape is said to "mention" P. By default, for an RDF data node to match that shape, every outgoing arc from that node that uses a mentioned predicate must match a triple constraint in the shape. This is called "closing a property". The following example asserts that every my:UserShape must have two rdf:types: ex:Employee and foaf:Person. The example data fails validation because ex:Manager is not a permitted object.

my:UserShape {
  a [ex:Employee];
  a [foaf:Person]
}
{ "type": "Schema",
  "shapes": {
    "my:IssueShape": { "type": "Shape",
      "expression": { "type": "group",
        "expressions": [
          { "type": "TripleConstraint",                   
            "predicate": "rdf:type",                      
            "value": { "type": "NodeConstraint",              
              "values": [ "ex:Employee" ]
            }                                             
          },                                              
          { "type": "TripleConstraint",                   
            "predicate": "ex:reportedBy",                 
            "value": { "type": "NodeConstraint",              
              "values": [ "foaf:Person" ]
            }                                             
          }                                               
        ]
      }
    }
  }
}
inst:User4 a foaf:Person, ex:Employee, ex:Manager.

The shape my:UserShape can be modified to accept any number of additional arcs with the predicate rdf:type by using the keyword EXTRA followed by the permitted predicate (here: a).

my:UserShape EXTRA a {
  a [ex:Employee];
  a [foaf:Person]
}
{ "type": "Schema",
  "shapes": {
    "my:UserShape": { "type": "Shape",
      "expression": { "type": "group",
        "expressions": [
          { "type": "TripleConstraint",                   
            "predicate": "rdf:type",                      
            "value": { "type": "NodeConstraint",              
              "values": [ "ex:Employee" ]
            }                                             
          },                                              
          { "type": "TripleConstraint",                   
            "predicate": "ex:reportedBy",                 
            "value": { "type": "NodeConstraint",              
              "values": [ "foaf:Person" ]
            }                                             
          }                                               
        ]
      }
    }
  }
}
inst:User4 a foaf:Person, ex:Employee, ex:Manager.

Repeated Properties

The use of generic predicates sometimes leads to their being used multiple times in the same shape. In the following example, we want to make sure that an issue that is ex:accepted or ex:resolved has been reproduced both by a tester and by a programmer.

my:IssueShape {
  ex:state [ex:accepted ex:resolved];
  ex:reproducedBy @my:TesterShape;
  ex:reproducedBy @my:ProgrammerShape
}

my:TesterShape {          
  foaf:name xsd:string;   
  ex:role [ex:testingRole]
}                         

my:ProgrammerShape {                      
  foaf:name xsd:string;                   
  ex:department [ex:ProgrammingDepartment]
}                                         
{
  "my:IssueShape": { "type": "Shape",
    "expression": { "type": "group",
      "expressions": [
        { "type": "TripleConstraint", "predicate": "ex:state",
          "value": { "type": "NodeConstraint", "values": [ "ex:accepted", "ex:resolved" ] }
        },
        { "type": "TripleConstraint", "predicate": "ex:reproducedBy",
          "value": { "type": "ShapeRef", "reference": "my:TesterShape" }
        },
        { "type": "TripleConstraint", "predicate": "ex:reproducedBy",
          "value": { "type": "ShapeRef", "reference": "my:ProgrammerShape" }
        }
      ]
    }
  },
  "my:TesterShape": { "type": "Shape",                                     
    "expression": { "type": "group",                                       
      "expressions": [                                                     
        { "type": "TripleConstraint", "predicate": "foaf:name",            
          "value": { "type": "NodeConstraint", "datatype": "xsd:string" }      
        },                                                                 
        { "type": "TripleConstraint", "predicate": "ex:role",              
          "value": { "type": "NodeConstraint", "values": [ "ex:testingRole" ] }
        }                                                                  
      ]                                                                    
    }                                                                      
  },                                                                       
  "my:ProgrammerShape": { "type": "Shape",                                 
    "expression": { "type": "group",                                       
      "expressions": [                                                     
        { "type": "TripleConstraint", "predicate": "foaf:name",            
          "value": { "type": "NodeConstraint", "datatype": "xsd:string" }      
        },                                                                 
        { "type": "TripleConstraint", "predicate": "ex:department",        
          "value": { "type": "NodeConstraint", "values": [ "ex:Programming" ] }
        }                                                                  
      ]                                                                    
    }                                                                      
  }                                                                        
}
inst:Issue1
  ex:state ex:accepted ;
  ex:reproducedBy inst:Tester2 ;
  ex:reproducedBy inst:Programmer3 .

inst:Tester2              
  foaf:name "Uldis" ;     
  ex:role ex:testingRole .

inst:Programmer3                          
  foaf:name "Liga" ;                      
  ex:department ex:ProgrammingDepartment .
inst:Issue1
  ex:state ex:accepted ;
  ex:reproducedBy inst:Tester2 ;
  ex:reproducedBy inst:Tester4 .

inst:Tester2              
  foaf:name "Uldis" ;     
  ex:role ex:testingRole .

inst:Tester4              
  foaf:name "Liene" ;     
  ex:role ex:testingRole .

Note that ShEx uses a partitioning strategy to find a solution whereby triples in the data are assigned to triple constraints in the schema. It is possible to construct schemas for which it is quite expensive to find a mapping from RDF data triple to ShEx triple constraint that satisfies the schema. In practical schemas, this is rarely a concern as the search space is quite small, however, certain mistakes in a schema can create a large search space.

Shape Re-use

In good programming spirit, ShEx provides mechanisms to factor and re-use shapes or schemas.

Reusing Triple Expressions

When multiple shapes share common triple expressions, the triple expressions can be defined and labeled just once and referenced multiple times. In the example below, both users and employees are expected to have a foaf:name and foaf:mbox. my:UserShape declares my:entity (with a dollar-sign prefix) and my:EmployeeShape includes it (with an ampersand prefix).

PREFIX ex: <http://ex.example/#>
PREFIX my: <http://my.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>

my:UserShape {
  $my:entity (
    foaf:name LITERAL ;
    foaf:mbox IRI+
  ) ;
  ex:userID LITERAL
}

my:EmployeeShape {
  &my:entity ;
  ex:employeeID LITERAL
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema", "shapes": [
    { "id": "http://my.example/#UserShape",
      "type": "Shape", "expression": {
        "type": "EachOf",
        "expressions": [
          { "type": "EachOf", "expressions": [
              { "type": "TripleConstraint",
                "predicate": "http://xmlns.com/foaf/0.1/name",
                "valueExpr": {
                  "type": "NodeConstraint",
                  "nodeKind": "literal" } },
              { "type": "TripleConstraint", "min": 1, "max": -1,
                "predicate": "http://xmlns.com/foaf/0.1/mbox",
                "valueExpr": {
                  "type": "NodeConstraint",
                  "nodeKind": "iri" } }
            ],
            "id": "http://my.example/#entity"
          },
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#userID",
            "valueExpr": {
              "type": "NodeConstraint",
              "nodeKind": "literal" } }
        ] }
    },
    { "id": "http://my.example/#EmployeeShape",
      "type": "Shape", "expression": {
        "type": "EachOf",
        "expressions": [
          "http://my.example/#entity",
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#employeeID",
            "valueExpr": {
              "type": "NodeConstraint",
              "nodeKind": "literal" } }
        ] } }
  ] }
inst:Employee2 foaf:name "Bob" ;
  foaf:mbox <mailto:bob@example.com> ;
  ex:employeeID "e02" .

inst:Employee3 ex:employeeID "e03" .    

inst:User1 foaf:name "Alice" ;
  foaf:mbox <mailto:alice@example.com> ;
  ex:userID "u01" .
NodeShapeResultReason
inst:Employee2my:EmployeeShapepass
inst:Employee3my:EmployeeShapefailExpected foaf:name and foaf:mbox arcs.
inst:User1my:UserShapepass

Importing schemas

The IMPORT directive allows the importing schema to reference shape and triple expressions in imported schemas. In the schema above, my:EmployeeShape references a triple expression (my:entity) in my:UserShape. If my:UserShape were defined in another schema, the schema containing my:EmployeeShape could import it and still reference my:UserShape and my:entity. In the example below, my:UserShape is defined in a schema referenced by the URL <https://shex.io/examples/import/UserSchema>. Relative URLs are resolved against the base URL of their containing document, which may be set by a BASE directive. Redunant imports are ignored which means that circular imports are not a problem.

PREFIX ex: <http://ex.example/#>
PREFIX my: <http://my.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>
BASE <https://shex.io/examples/import/>
IMPORT <UserSchema>

<EmployeeSchema#EmployeeShape> {
  &<UserSchema#entity> ;
  ex:employeeID LITERAL
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "imports": ["https://shex.io/examples/import/UserSchema"],
  "shapes": [
    { "id": "https://shex.io/examples/import/EmployeeSchema#EmployeeShape",
      "type": "Shape", "expression": {
        "type": "EachOf",
        "expressions": [
          "https://shex.io/examples/import/UserSchema#entity",
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#employeeID",
            "valueExpr": {
              "type": "NodeConstraint",
              "nodeKind": "literal" } }
        ] } }
  ] }
inst:Employee2 foaf:name "Bob" ;
  foaf:mbox <mailto:bob@example.com> ;
  ex:employeeID "e02" .

inst:Employee3 ex:employeeID "e03" .    

inst:User1 foaf:name "Alice" ;
  foaf:mbox <mailto:alice@example.com> ;
  ex:userID "u01" .

This import above loads the schema below. The &<UserSchema#entity> "expressions": ["https://shex.io/examples/import/UserSchema#entity", ...] references the <#entity> triple expression in this schema:

PREFIX ex: <http://ex.example/#>
PREFIX foaf: <http://xmlns.com/foaf/0.1/>

<#UserShape> {
  &<UserSchema#entity> (
    foaf:name LITERAL ;
    foaf:mbox IRI+
  ) ;
  ex:userId LITERAL
}
{ "@context": "http://www.w3.org/ns/shex.jsonld",
  "type": "Schema",
  "imports": ["https://shex.io/examples/import/UserSchema"],
  "shapes": [
    { "id": "https://shex.io/examples/import/EmployeeSchema#EmployeeShape",
      "type": "Shape", "expression": {
        "type": "EachOf",
        "expressions": [
          "https://shex.io/examples/import/UserSchema#entity",
          { "type": "TripleConstraint",
            "predicate": "http://ex.example/#employeeID",
            "valueExpr": {
              "type": "NodeConstraint",
              "nodeKind": "literal" } }
        ] } }
  ] }

The results are the same as if both documents were combined in one schema:

NodeShapeResultReason
inst:Employee2my:EmployeeShapepass
inst:Employee3my:EmployeeShapefailExpected foaf:name and foaf:mbox arcs.
inst:User1my:UserShapepass

Inheritance

In addition to allowing one to textually include other schemas, ShEx provides operators to define shape expressions as restrictions or extensions of other shapes.

Restriction

ShEx AND can be used to add constraints to multiple shape expressions. For instance, a AdminShape and an SalesShape may both restrict a common definition which we can call PersonShape. Additionally, suppose an issue's ex:reportedBy property can someone from either admin or sales:

<IssueShape> {
  ex:reportedBy @<AdminShape>
             OR @<SalesShape>
}

<PersonShape> {
  foaf:name xsd:string ;
  foaf:mbox IRI
}

<AdminShape> @<PersonShape> AND {
  foaf:mbox /@admin\.example\.org$/
}

<SalesShape> @<PersonShape> AND {
  foaf:mbox /@sales\.example\.org$/
}

          

Here, <AdminShape> and <SalesShape> both restrict the foaf:mbox property in <PersonShape>. We can make this intention more explicit by declaring that my:AdminShape RESTRICTS my:PersonShape:

<IssueShape> {
  ex:reportedBy @<PersonShape>
}

ABSTRACT <PersonShape> {
  foaf:name xsd:string ;
  foaf:mbox IRI
}

<AdminShape>
  RESTRICTS <PersonShape> {
  ex:representative @<SalesShape>
}

ABSTRACT <RepShape> {
  foaf:phone IRI+
}

<SalesShape>
  RESTRICTS <PersonShape>
  RESTRICTS <RepShape> {
}

            
<Issue1>
    ex:reportedBy   <User2> ;
    ex:reproducedBy <Thompson.J> ;
.

<User2>
    foaf:name "Bob Smith" ;
    foaf:mbox <mail:bob@example.org> ;
    ex:representative <Thompson.J>
.

<Thompson.J>
    foaf:name "Joe", "Joseph Thompson" ;
    foaf:phone <tel:+456> ;
    foaf:mbox <mail:joe@example.org>
.

This has the same effect as ANDing my:AdminShape with my:PersonShape except that my:AdminShape is said to inherit from my:PersonShape. This inheritance allows us to simplify the earlier "@<AdminShape> OR @<SalesShape>" by declaring that reportedBy can be anything which is derived from @<PersonShape>. Note that we don't want reportedBy to be satisfied by a @<PersonShape> alone as that would ignore our restrictions to @<AdminShape> and @<SalesShape>. Instead we want to require that reportedBy be anything which inherits from @<PersonShape>. For this, we use the keyword ABSTRACT.

Abstract Shapes

Marking a shape ABSTRACT states that only shapes inheriting from that shape may satisfy that shape. This is analogous to its use in object oriented programming where an ABSTRACT class may not be instantiated; instead only non-abstract derived classes may be created.

Extension

Just as restriction can be simulated with ANDing shapes, extension can be simulated with triple expression references, i.e. the & operator. For instance, a UserShape and an EmployeeShape may both add properties to a PersonShape.

<IssueShape> {
  ex:reproducedBy @<UserShape>
               OR @<EmployeeShape>?
}

<PersonShape> {
  $<PersonShape> (
    foaf:name xsd:string ;
    foaf:mbox IRI
  )
}

<UserShape> {
  &<PersonShape> ;
  ex:representative @<EmployeeShape>
}

<EmployeeShape> {
  &<PersonShape> ;
  foaf:phone IRI+
}

            

Here, <UserShape> and <EmployeeShape> both extend <PersonShape> by providing additional properties. As with RESTRICTS we can make this more explicit with the keyword EXTENDS:

<IssueShape> {
  ex:reportedBy @<PersonShape>;
  ex:reproducedBy @<EmployeeShape>?
}

ABSTRACT <PersonShape> {
  foaf:name xsd:string ;
  foaf:mbox IRI
}

<UserShape> EXTENDS <PersonShape> {
  ex:representative @<EmployeeShape>
}

ABSTRACT <RepShape> {
  foaf:phone IRI+
}

<EmployeeShape>
  EXTENDS <PersonShape> <RepShape> {
}

            
<Issue1>
    ex:reportedBy   <User2> ;
    ex:reproducedBy <Thompson.J> ;
.

<User2>
    foaf:name "Bob Smith" ;
    foaf:mbox <mail:bob@example.org> ;
    ex:representative <Thompson.J>
.

<Thompson.J>
    foaf:name "Joe", "Joseph Thompson" ;
    foaf:phone <tel:+456> ;
    foaf:mbox <mail:joe@example.org>
.

shape expressions on partitions

ON SHAPE EXPRESSION (or more succinctly, just ON) ...

For any well-formed schema, any extension of a restriction can be translated to a triple expression with an attached shape expression.

Relationship of ShEx to RDF and OWL

ShEx is designed to fill a long-recognized gap in Semantic Web technology. The Resource Description Framework language (RDF), and the more expressive Web Ontology Language (OWL), were designed for making statements about things "in the world" or, more precisely, about things in a conceptual caricature of the world. Things in that caricature may include anything from people, books, abstract ideas, and Web pages to planets or refrigerators. By design, RDF and OWL were optimized for aggregating information from multiple sources and for processing incomplete information. If a model in OWL says that a person has two biological parents, and only one parent is described in a given graph, an OWL processor will not report a mismatch between the model and the graph because the second parent is assumed to exist even if it is not described in the data. In other words, the graph could describe the second parent if more triples were supplied. In logic, this is called the "open world assumption".

In contrast, real-world data applications must often test the integrity of their data by flagging such omissions as non-conformant, and the ShEx language was designed for use in making such conformance tests. Where an RDF graph describes things in the caricature of the world, a ShEx schema describes things that are actually "in the data" of RDF data graphs. A shape expression refers to an RDF graph as a collection of abstract-syntactic entities: IRIs, blank nodes, literals, and triples, seen either as incoming arcs or outgoing arcs, with subjects, predicates, and objects. Inasmuch as a ShEx schema is tested against a given RDF data graph, and does not consider potential but unknown data outside of that graph, the ShEx model of conformance testing follows the "closed world assumption". That said, a ShEx schema can specify a "closed" interpretation, meaning that data can conform only if it includes only triples specified in the schema, or an "open" interpretation, meaning that data triples not specified in the schema are simply ignored.

It should be noted that a ShEx schema is valid as an RDF expression in an open-world sense. A ShEx schema describes something in the world, where that "something" happens to be the set of abstract-syntactic components that comprise an RDF graph. However, such an interpretation is of no use in practical terms. The utility of a ShEx schema derives from its use for testing against the abstract-syntactic components "in the data" of an RDF graph to yield a conformance test result. It should also be noted that a ShEx schema is not an RDF schema, even though both describe RDF data. For historical reasons, "RDF Schema" is the name of a language for defining RDF vocabularies and for specifying semantic relationships between terms that can be used to infer relationships between RDF resources [[rdf-schema]]. A ShEx schema, in contrast, defines structural constraints, analogously to relational or XML schemas.

Namespaces in this Document

Prefix Namespace
rdf: http://www.w3.org/1999/02/22-rdf-syntax-ns#
xsd: http://www.w3.org/2001/XMLSchema#
Example namespaces Used in
foaf: http://xmlns.com/foaf/0.1/ Friend Of A Friend vocabulary
ex: http://ex.example/ns# random application ontology
my: http://my.example/ns# shape declarations
inst: http://inst.example/ns# instance data

Contol click to return to this form.